Touch Screen Control Board Driver ETP-SAT4500G-G ETP-RAT4501-E RAP4502RPEG
- Model
- Touchkit EETI eGalax ETP-SAT4500G-G ETP-RAT4501-E
Item specifics
- touch screen repair replacement
- touch panel repair replacement
Review
Description
sThis touch panel controller provides the optimistic performance of your analog resistive touch panels for 4-wire and 5-wire models. It communicates with PC system directly though USB and RS232 connector.
You can see how superior the design is in sensitivity, accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operations systems, including Microsoft Windows Vista, Windows XP,2000,95/98
Windows Me, NT4.0,CE2.12 & 3.0/ NET ,DOS
You can see how superior the design is in sensitivity, accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operations systems, including Microsoft Windows Vista, Windows XP,2000,95/98
Windows Me, NT4.0,CE2.12 & 3.0/ NET ,DOS
- Circuit Board Dimension:20mm x 68mm (0.79inches x 2.68inches)----(4-Wire)
- Power Requirements：D.C.+5V (100mA typical,50mV peak to peak maximum ripple and noise)
- Operating Temperature：0 to 50 ℃
- Storage Temperature：-40 to 80 ℃
- Relative Humidity：95% at 60 ℃
- Interface：USB 1.1 Low Speed
- Report rate：USB Model: Max. 160 points/sec
- Response time：Max. 35 ms
- Attached Cable：6' shielded cable with USB-A connector for
- Regulatory Approvals:FCC-B , CE,Unaffected by EMI from other nearly CRTs
and other display devices - EMI:Unaffected by environmental EMI
Panel resistance:4 wire resistive model: 300 ~ 900 ohm
4 / 5-Wire USB Touch Panel Controller |
eGalax_eMPIA launched touch control board to meet latest Restriction of Hazardous Substances (RoHS) Directive. This touch panel controller provides the optimistic performance of your analog resistive touch panels for 4 or 5 wire models. It communicates with PC system directly through USB connector. You can see how superior the design is in sensitivity 、accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operation systems as following.
OS | Version | Interfaces |
Windows | Windows Vista, XP/2000, 9x/ME Windows CE 2.12/3.0/.net/5.0/6.0 Windows Embedded Windows XP Tablet PC edition Windows Vista Windows 7 | RS232/USB/ PS2 |
Windows | Windows NT4 | RS232/PS2 |
Linux | Mandrake (Mandrake 9.1/9.2/10, Mandriva 2005, Mandriva 2006), Red Hat (7.3/8.0/9.0), Fedora (Core I/II/III/IV/V/VI), Yellow Dog (3.X) , SuSE (9.2/9.3/10/10.1), Ubuntu (5.1/6.06), Debian (3.1, Kernel 2.4.x/2.6.x) | RS232/USB/ PS2 (up to Kernel 2.6.x) |
Android 1.5 – Google Moblin V2 - Intel | RS232/USB | |
DOS | DOS | RS232/PS2 |
Mac | Mac OS9, Mac OS X (IBM, intel CPU) | USB |
QNX | QNX RTOS v6.3 | RS232/USB |
Controller:
Specifications:
USB Type Controller | |
Circuit Board Dimension | 20mm x 75mm (0.79inches x 2.95inches) |
Power Requirements | D.C.+5V (100mA typical,50mV peak to peak |
maximum ripple and noise) | |
Operating Temperature | -25 to 80℃ |
Storage Temperature | -55 to 150℃ |
Relative Humidity | 95% at 60℃, RH Non-condensing |
Interface | USB: 1.1 Full Speed |
Resolution | 2048×2048 resolution |
Report rate | USB: Max. 200 points/sec |
Response time | Max. 20 ms |
Attached Cable | 180cm shielded cable with USB-A connector |
Regulatory Approvals | FCC-B , CE, Unaffected by EMI from other nearly CRTs and other display devices CRTs |
EMI | Unaffected by environmental EMI |
Panel resistance | 4 wire resistive model: 200 ~ 900 ohm 5 wire resistive model: 50 ~ 200 ohm |
Product Package:
(1)
ETP-MB-R4500UPCG (4 / 5 wire USB control board)
(2)
ETP-CB-SXU00 (USB cable)
(3)
ETP-CB-4XN00 (4 pin Flat cable) or
ETP-CB-5XN00 (5 pin Flat cable)
Controller Panel Pin Assignment:
For 4-Wire Resistive Touch Panel
Pin-Out as below figure is automatically detected
For 5-Wire Resistive Touch Panel
ELO or 3M type Pin-Out is automatically detected
NC
Y+
Y-
X-
X+
NC
Controller Wafer Pin Assignment:
