USB RS232 Touch Controller Board ETP-4500UG-B ETP-RAP4501-E RAP4502UPEG
USB RS232 Touch Controller Board ETP-4500UG-B ETP-RAP4501-E RAP4502UPEG
USB RS232 Touch Controller Board ETP-4500UG-B ETP-RAP4501-E RAP4502UPEG
Model
ETP-RAP4501-E RAP4502UPEG

Item specifics

touch screen repair replacement
touch panel repair replacement

Product review

Description

This touch panel controller provides the optimistic performance of your analog resistive touch panels for 4-wire and 5-wire models. It communicates with PC system directly though USB and RS232 connector.

You can see how superior the design is in sensitivity, accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operations systems, including Microsoft Windows Vista, Windows XP,2000,95/98

Windows Me, NT4.0,CE2.12 & 3.0/ NET ,DOS

  • Circuit Board Dimension:20mm x 68mm (0.79inches x 2.68inches)----(4-Wire)

  • Power RequirementsD.C.+5V (100mA typical,50mV peak to peak maximum ripple and noise)

  • Operating Temperature0 to 50

  • Storage Temperature-40 to 80

  • Relative Humidity95% at 60

  • InterfaceUSB 1.1 Low Speed

  • Report rateUSB Model: Max. 160 points/sec

  • Response timeMax. 35 ms

  • Attached Cable6' shielded cable with USB-A connector for

  • Regulatory Approvals:FCC-B , CE,Unaffected by EMI from other nearly CRTs

    and other display devices

  • EMI:Unaffected by environmental EMI
Panel resistance:4 wire resistive model: 300 ~ 900 ohm
ETP-MB-R4500UPCG (4 / 5 wire USB control board)
ETP-CB-SXU00 (USB cable)
ETP-CB-4XN00 (4 pin Flat cable)
ETP-CB-5XN00 (5 pin Flat cable)
ETP-MB-R4500RPCG (4 / 5 wire RS232 control board)
ETP-CB-SXR00 (RS232 cable)
ETP-CB-4XN00 (4 pin Flat cable) or
ETP-CB-5XN00 (5 pin Flat cable)








4 / 5-Wire USB

Touch Panel Controller
eGalax_eMPIA launched touch control board to meet latest Restriction of Hazardous Substances (RoHS) Directive. This touch panel controller provides the optimistic performance of your analog resistive touch panels for 4 or 5 wire models. It communicates with PC system directly through USB connector. You can see how superior the design is in sensitivity accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operation systems as following.










































OS

Version

Interfaces

Windows

Windows Vista, XP/2000, 9x/ME

Windows CE 2.12/3.0/.net/5.0/6.0

Windows Embedded

Windows XP Tablet PC edition

Windows Vista

Windows 7

RS232/USB/

PS2

Windows

Windows NT4

RS232/PS2

Linux

Mandrake (Mandrake 9.1/9.2/10, Mandriva 2005, Mandriva 2006),

Red Hat (7.3/8.0/9.0),

Fedora (Core I/II/III/IV/V/VI),

Yellow Dog (3.X) ,

SuSE (9.2/9.3/10/10.1),

Ubuntu (5.1/6.06),

Debian (3.1, Kernel 2.4.x/2.6.x)

RS232/USB/

PS2 (up to Kernel 2.6.x)

Android 1.5 – Google

Moblin V2 - Intel

RS232/USB

DOS

DOS

RS232/PS2

Mac

Mac OS9, Mac OS X (IBM, intel CPU)

USB

QNX

QNX RTOS v6.3

RS232/USB
Controller:
Specifications:






























































USB Type Controller

Circuit Board Dimension

20mm x 75mm (0.79inches x 2.95inches)

Power Requirements

D.C.+5V (100mA typical,50mV peak to peak


              maximum ripple and noise)

Operating Temperature

-25 to 80

Storage Temperature

-55 to 150

Relative Humidity

95% at 60, RH Non-condensing

Interface

USB: 1.1 Full Speed

Resolution

2048×2048 resolution

Report rate

USB: Max. 200 points/sec

Response time

Max. 20 ms

Attached Cable

180cm shielded cable with USB-A connector

Regulatory Approvals

FCC-B , CE, Unaffected by EMI from other nearly CRTs and other display devices CRTs

EMI

Unaffected by environmental EMI

Panel resistance

4 wire resistive model: 200 ~ 900 ohm

5 wire resistive model: 50 ~ 200 ohm
Product Package:
(1)
ETP-MB-R4500UPCG (4 / 5 wire USB control board)
(2)
ETP-CB-SXU00 (USB cable)
(3)
ETP-CB-4XN00 (4 pin Flat cable) or
ETP-CB-5XN00 (5 pin Flat cable)
Controller Panel Pin Assignment:
For 4-Wire Resistive Touch Panel
Pin-Out as below figure is automatically detected
For 5-Wire Resistive Touch Panel
ELO or 3M type Pin-Out is automatically detected
NC
Y+
Y-
X-
X+
NC
Controller Wafer Pin Assignment: